EV Maintenance Equipment

EV Maintenance Equipment Solutions

Electric vehicle maintenance equipment is special equipment used to maintain and maintain electric vehicles. Electric vehicles use electric or hybrid technology that replaces traditional internal combustion engine power, including pure electric vehicles (BEV), plug-in hybrid electric vehicles (PHEV), etc.

Smart Equipment EV Maintenance Equipment Products

EP101 Portable Single-Cell Charger & Discharger

EP101 is speciﬁcally designed for cell-level testing, integrates charging, discharging, capacity, and internal resistance measurement, features high-precision control and multiple safety protections, lightweight and portable, suitable for cell-level maintenance and recycle testing.

ECP739 Electric Compressor Comprehensive Tester

ECP739 electric compressor comprehensive tester is a highly cost-eﬀective device that supports both electric-compressor drive-circuit testing and mechanical-function testing.

DP903 Digital Power Supply & Portable Charger

DP903 is an intelligent high-voltage power supply and multi-function mobile charging all-in-one equipment, designed for oﬄine driving and maintenance testing of high-voltage components, as well as mobile charging scenarios for repair vehicles.

EP865 EV Battery Pack Charge & Discharge Equipment

The EP865 is a device designed for power battery pack maintenance. It supports fast charging and discharging of the entire vehicle or battery pack, has comprehensive safety protection, and is suitable for whole-pack maintenance operations.

CE39 EV Diagnose, Equalize & Charge/Discharge Equipment

CE39 is the industry’s first four-in-one EV diagnostic and maintenance equipment that integrates vehicle diagnostics, battery cell equalization and module charging/discharging.

ET500 EV Battery Airtightness Detector (High pressure)

ET500 is a high/lowe-voltage aitightness testing device for electric vehicle battery pack boxes and liquid cooling systems, suitable for scenanos such as battery pack end-of-line production, power system assembly, and maintenance re-encapsulation testing.

ET30 EV Battery Airtightness Detector (Low pressure) (Original Model: iSmartEV ET30)

ET30, a type of high-precision non-destructive leak testing equipment for EV Batteries, which mainly uses compressed air as medium to exert certain pressure on the inner cavity or outer surface of the product to be tested, and then uses high-sensitivity sensors to detect the change of pressure, so as to determine the sealing performance of the product to be tested.

ECB240 Charge, Discharge, and Equalize All-in-One Machine

ECB240 is a high-power, high-current, charging, discharging and equalization integrated maintenance equipment designed specifically for large-capacity battery packs. It supports efficient charging and discharging and multi-channel cell equalization to improve battery pack maintenance efficiency.

EB240 EV Battery Cell Equalizer (Original Model: iSmartEV EB240)

EB240 Battery Equalizer is a battery maintenance equipment specially designed for electric batteries developed by SmartSafe. It is used to quickly solve cruising range degradation caused by the difference in cell capacity due to inconsistent cell voltages. It has the characteristics simple operation, stable performance, strong anti harmonic ability and convenient carrying. It can be applied to power battery production, new energy vehicle enterprise R&D, new energy battery pack maintenance and other scenarios.

EB480 EV Battery Cell Equalizer (Original Model: iSmartEV EB480)

EB480 battery cell balancer is developed by SmartSafe, a battery maintenance equipment used in Electric Vehicles. It is used to quickly solve the cruising range degradation caused by the battery capacity difference caused by battery voltage inconsistency. As a battery balancer suitable for all lithium battery types, it is the best choice for professionals in new energy repair shops!

EP401 EV Battery Charge & Discharge Equipment

The EP401 is a battery pack module integrated charge-discharge machine designed based on the characteristics of lithium-ion batteries used in electrical vehicles. It can efficiently perform the charging, discharging, and balancing of battery pack modules, thereby enhancing the efficiency of battery pack maintenance.

MPT-100 Multi-functional tool trolley

MPT-100 is a multi-functional tool trolley with 5 layer design can help you place the tool/equipment orderly. The lockable drawer can effectively prevent the important tools from missing.

DP901 Adjustable High Voltage Power Supply (Original Model: iSmartEV DP900)

As an upgraded version of DP750, DP901 has a high-voltage output-voltage range of 50-900V, a low-voltage output voltage range of 0-50V, and a wide range of 0-900V voltage output, making it suitable for more application scenarios.

LT150 EV battery lift（Pneumatic version)

A professional electrical vehicle battery pack disassembly and assemblymachine, and can quickly and safely complete the battery pack disassemblyand assembly from the bottom of the vehicle, and move and repairpositions. Equipped with heavy 360universal mobile casters to move orlock in place, and equipped with pressure insulation protective pads toprotect the safety of maintenance personnel.

LT150 EV Battery Lift (Electric version) (Original Model: iSmartEV LT150)

TB293 Intelligent type LCD wheel balancer

The TB293 intelligent type LCD wheel balancer revolutionizes workflow efficiency with its automated measuring scale, smart calibration, and auto-positioning technologies, ensuring fast, simple, and precisely accurate balancing results.

TB291 Standard type LED wheel balancer

The TB291 Standard type LED wheel balancer, equipped with essential modes such as ALU1-3 and ALU-S, is user-friendly and serves as an excellent entry-level balancing machine.

TC195 Automatic Lever-less Tire Changer

TC195 Automatic Lever-Free Tire Changer: Solving traditional pain points of inefficiency, inaccuracy, and rim damage. Engineered for professional environments where superior performance, productivity, and equipment longevity are critical.

TC193 Reclining Type Deluxe Right Auxiliary Arm Tire Changer

TC193 Reclining Type Deluxe Right Auxiliary Arm Tire Changer significantly enhances efficiency, safety, and adaptability in tire servicing, particularly excelling in handling specialized tires such as run-flat and wide-base tires.

TC191 Swing Arm Type Basic Left Auxiliary Arm Tire Changer

The TC191 swing-arm type simple left-side assist tire changer is widely used in small and medium-sized auto repair shops, quick service and maintenance centers, and tire retail stores due to its simple structure, low cost, and easy maintenance.

LT240 Floor Plate Two Post Lift (Original Model: iSmartTLT 242)

LT240 is a floor-type double-column lift that adopts an electro-hydraulic power system. Its steel structure column is stamped and bent from a thickened steel plate, and its appearance is fully sprayed with plastic, which is durable.

LT240C Clear Floor Two Post Lift

LT240C is a gantry-type double-column lift with an electro-hydraulic power system, with a lifting capacity of 4.0T, suitable for work stations such as metal or machine repair and quick oil change.

LT630T Ultra-thin Small Scissor Lift

LT630T is a mobile scissor lift with a lifting capacity of 3000kg without installation.

LT636T Ultra-thin Small Scissor Lift

LT636T is an ultra-thin flatbed lift that can be installed on the ground. Solid structure, high-temperature spray-coated surface treatment and durability.

LT640T Ultra-thin Small Scissor Lift

LT640T is an ultra-thin flatbed lift that can be installed on the ground. It has a lifting capacity of 4.0 tons and is suitable for rapid maintenance, tire replacement and other workstations.

LT640 Small Scissor Lift

LT640 is an in-ground flatbed lift with a lifting capacity of 4.0 tons. It is suitable for rapid maintenance, tire replacement and other workstations.

LT840T Ultra-thin Big Scissor Lift

LT840T is an ultra-thin wheel alignment lift that adopts whole-plate bending and high-strength bridge plates. The entire machine is made of alloy materials over a large area, with a solid structure and high-temperature spray-coated exterior treatment for durability.

LT840 Big Scissor Lift

LTLT840 is an Big Scissor Lift. The significantly thickened bridge plate ensures the accuracy of the four-wheel alignment cart. The high-precision insurance ensures the stability of the wheel alignment data. The X-support frame is made of solid steel and its anti-rust performance is greatly improved compared to the traditional square tube-type X-support frame. It has excellent performance and high durability.

LT245 4.5t Floor Plate Two Post Lift

LT245 is a floor-type double-column lift that adopts an electro-hydraulic power system. Its steel structure column is stamped and bent from a thickened steel plate, and its appearance is fully sprayed with plastic, which is durable.

LT445 Four Post Lift

LT445 is a fully automatic control insurance wheel alignment four post lift, equipped with an electronically controlled pneumatic insurance device. This enhances the overall high-level experience and convenience of use. It comes with insurance detection equipment, ensuring safety and reliability. The composite reinforced bridge plate design adds robust support.

LT245C 4.5t Clear Floor Two Post Lift

LT245C is a gantry-type double-column lift with an electro-hydraulic power system, with a lifting capacity of 4.5T, suitable for work stations such as metal or machine repair and quick oil change.

TT430 430pcs Mechanic Tools Cart Kit

TT430 is a solution for the vehicle machine maintenance. It not only has a full range of general-purpose tools, but also adds special tools for popular vehicle models. TT430 tool cart can both meet the demands of most vehicle models and used for special vehicles.

TT116 EV Maintenance Tool Trolley

TT116 is a professional auto repair tool trolley developed for electric vehicle maintenance, containing 116 pieces of commonly used insulating tools, with comprehensive functions, reliable quality, both practicality and cost-effective.

Why Choose Smart Equipments

Smart Equipment usually provides timely technical support services, assisting customers in resolving issues and difficulties encountered during tool usage. This ensures customers receive prompt assistance and support, ensuring smooth operation and efficient utilization of diagnostic tools.

Smart Equipment automotive diagnostic tools typically feature intuitive user interfaces and simple operating procedures, making them easy for customers to use and operate. This facilitates hassle-free vehicle diagnostics for customers.

Smart Equipment automotive diagnostic tools typically offer comprehensive diagnostic capabilities, allowing for quick and accurate identification of vehicle faults and issues. This means customers can access faster and more effective solutions, aiding in prompt vehicle repairs, reducing downtime, and maintenance costs.

Smart Equipment is a renowned brand known for its reliable product quality and excellent performance. Choosing Smart Equipment automotive diagnostic tools means customers can trust in the quality and reliability of their products, providing lasting performance and value.

Providing high-quality diagnostic services can help customers quickly address vehicle issues, enhancing their satisfaction and loyalty. Customers are more likely to choose brands and dealerships that offer reliable services and support, thereby increasing sales and word-of-mouth recommendations.

Smart Equipment automotive diagnostic tools are often compatible with multiple vehicle makes and models, catering to various automotive needs. This eliminates the need for customers to purchase multiple diagnostic tools from different brands, saving costs and improving work efficiency.

Let's Build Your Workshop Together

Looking for the right automotive workshop equipment? Whether you need product recommendations, a customized quotation, or technical guidance, our team is here to help. Contact us today, and we’ll provide the right solution for your business.